Subject in recorded image is too dark. Could not save the print, transfer or slide show settings. Moving the equipment rapidly between hot and cold temperatures may cause condensation water droplets to form on its external and internal surfaces. When not using the camera for extended periods of time, remove the battery from the camera or battery charger and store the equipment in a safe place. The transition effect will not display when an image is switched while the camera is reading an image from the memory card. The specified color accent is retained even if the camera's power is turned off. The camera will switch to color input mode and the display will alternate between the original image and the color accent image.
Please read the instructions accompanying the flash along with this explanation. If required, download the images to a computer and erase them from the memory card to make space. Memory card was Use a memory card formatted in formatted in another your camera 23. These substances may distort or damage the equipment. Print postcard-sizeprints Medium 2 1600 x 1200 148 x 100 mm 6 x 4 in. The card supplied with the camera may be used without further formatting. Some items may not be selectable in some shooting modes.
When the shutter button is pressed fully, the self-timerwill activate and the self-timerlamp will blink. The camera will retain the custom white balance setting that you record even if you reset the camera to the default settings p. Jump Shot Date Jumps to the first image of each shooting date. The battery may be short circuiting. See Menus and Settings p. Displaying time can vary slightly depending on the image.
You are advised to charge the battery on the day of use, or one day before, to ensure a full charge. You attempted to play back an image with corrupted data. The date stamp cannot be deleted from the image data once it has been set. Vivid Emphasizes the contrast and color saturation to record bold colors. My Colors Settings Use this option to make red, green or blue colors more intense like the Vivid Red, Vivid Green or Vivid Positive Film Blue effects.
See Menus and Settings p. The resulting heat build-upcould damage the flash. Use the following procedures to affix the camera and High-PowerFlash to the supporting bracket. Do not allow any metal objects Fig. See Menus and Settings 26. Use the toggle on the wrist strap to open the terminal cover p. See Menus and Settings p.
A new folder will automatically be created when you record more than that number even if you are not creating new folders. Shutter Volume Adjusts the volume of the sound played when the shutter releases. Subject in recorded image is too bright. You can also protect images in the index playback mode. Stop operating the equipment immediately if it emits smoke or noxious fumes.
If you hold the camera horizontally, it displays the time. Recording will cease when the shutter button is released. If the flash is used, the interval between shots lengthens because the flash must charge. See Menus and Settings p. Operation Sound Sets the sound played when any button other than p. However, if you hold the camera vertically and use method 1 to display the date and time, the time will be initially displayed in the same way as when the camera is held horizontally. See Menus and Settings p.
Images with a icon are movies. All Images Plays all images on a memory card in order. Select Record and press The elapsed time and the remaining time display. Shutter Sound Sets the sound played when the shutter button is pressed. Exx xx: number Camera malfunction.