It will create a realistic sound that could be heard in the theaters and con- cert halls. Before using a listening mode, make sure the Speaker Setup parameters have been set refer to page 14. It enhances the entire sur- round sound and clarity of conversation. You can also contact us if you are not satisfied with the user manual or if is of a low quality. Listening mode button These buttons allow you to select a Surround mode. This is not a malfunction. This is because the digital signal has been pro- cessed such as the output level, sampling frequency, frequency response, etc.
All input sound is output from the front speakers. The front and surround channels will create a stereo image. Follow the steps below to make adjustment to the speaker level set by the Test Tone. Use these buttons to set the Listening mode parameters. The configuration of the speakers are very important for the sur- round sound. If you think that you have a newer or better version of the user manual, share it with others.
Each option appears as shown at left. The center channel is cut and the surround channels are emphasized to widen the stereo image. . From this point on you will not have to guard the documentation of your devices. Lively sounds with a powerful acoustic image will make you feel as if you are in a club. We will try to get the appropriate document for you. After such a long period, many people have a problem with finding documents such as a user manual received at the time of purchase, or maybe the documents have already been thrown out, got lost so that it is impossible to find them.
Once the parameters have been set, it is not necessary to set them again. By emphasizing the front stereo image, it will simulate the acoustics in front of the stage. Input selector buttons Select the desired input source. It will simulate a natural reverberation that can be created in a large hall. If you have problems viewing or downloading the user manual, report it to us. This format is very effective for panning music, con- versation, and three-dimensional sound movement output from three front channels. In this case, stop the playback of the source on the player for about three seconds, then resume playback.
It also simulates the atmosphere and surround effects of the sound reflected from the side and rear walls of the theater. This noise could damage the amplifier and speakers. This is not a mal- function. . . .
. . . . . .
. . . . . .
. . . . .