Shut the engine off and remove ignition key before removing the cutting blade s for Front Spindle sharpening or replacement. Read and follow all instructions in this manual before attempting to operate this machine. I do wish that they would use a thicker walled tire and save me the hassle of having to make a trip to the tire shop. All slopes roads and while not cutting grass. Failure to comply with these instructions may result in personal injury. It was carefully The manufacturer reserves the right to change product engineered to provide excellent performance when properly specifications, designs and equipment without notice and operated and maintained. Fully depress the brake pedal and hold it down with your accident.
Read and follow all instructions in the manual before attempting to operate your outdoor power equipment. Equal tire pressure should Battery posts, terminals, and related accessories be maintained at all times. Due to the size of the Operator's Manual, some Operator's Manuals are broken down into two or more segments so that the entire Operator's Manual can be downloaded easily. See your authorized dealer or the retailer from which you purchased your tractor for information regarding price and availability. Grind metal from the heavy side until it balances evenly.
Release the bra Summary of the content on the page No. Lower the deck by moving the deck lift lever into the Insert Ratchet bottom notch on the right fender. Read and follow all instructions in this manual before attempting to operate this machine. Taxes, applicable fees, setup and delivery not included. Failure to observe the safety rules and instructions, both on the machine and in the Operator's Manual, could result in serious injury or death. Check sidewall of tires for maximum psi. This system was designed for your safety and protection.
Front Wheels Each of the front wheel axles and rims is equipped with a grease fitting. Read and follow all safety rules and instructions in this manual, including the entire Operation section, before attempting to operate this machine. Tampering with the governor setting can lead to a runaway do not stop within the this time frame, your machine engine and cause it to operate at unsafe speeds. Watch for traffic when operating near or crossing roa Summary of the content on the page No. A riding mower could overturn and cause serio Summary of the content on the page No. Wrap the blade or wear gloves, and use extra caution when servicing them. Your outdoor power equipment was built to be operated according to the rules and instructions for safe operation which are contained in the operator's manual and on the machine itself.
However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase. To avoid personal injury or property damage use extreme the dangers. Models and pricing may vary by location. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. This lever controls the speed of the engine Button and, when pushed all the way forward, the choke control also.
Tragic accidents can occur if the operator is not alert to the Safe Handling of Gasoline: presence of children. Remove the fuel cap by turning it maintained at all times. Serious personal injury can occur when gasolin Summary of the content on the page No. When you see this symbol. It was If you have any problems or questions concerning the machine, carefully engineered to provide excellent performance when phone a authorized Troy-Bilt service dealer or contact us directly.
Figure 7-5 Figure 7-4 To properly sharpen the cutting blades, remove equal. Failure to comply with all safety rules and instr Summary of the content on the page No. Slopes are a major factor related to loss of control and tip-over 13. Never carry children, even with the blades off. Stop the blade s when crossing gravel drives, walks, or accidents which can result in severe injury or death. Summary of the content on the page No. Exercise extreme caution when changing direction on slopes.
The use of any non-exempted add-on or modified parts by the ultimate purchaser will be grounds for disallowing a warranty claim. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Periodically check to make sure the blades come to Do not modify engine complete stop within approximately 5 five seconds after To avoid serious injury or death, do not modify engine in any operating the blade disengagement control. It will help you assemble, prepare, maintain and safely operate your machine. To avoid serious injury or death, do not modify engine in any Keep all nuts, bolts, and screws tight to be sure the way. Prices and special offers valid only in Canada.
Summary of the content on the page No. Spark plug wire s disconnected. Disengage blade s before shifting into reverse. Pricing Disclaimer: Posted price is manufacturer's suggested retail price. Maximum tire pressure under any before removing the fuel cap. Protect your hands by Deck Idler Pulley using heavy gloves when grasping blades and Pulleys pulleys.
Lightly press the brake pedal to release the parking brake. Connect wire s to spark plug s. Always look down and behind before and while traveling in reverse to avoid a back-over 1. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Failure to comply with these instructions may result in personal injury.