If this button is off, press the button to turn it on. In addition, you can select multiple scenes by pressing the multifunction encoder while you turn it. These models differ as follows. The line highlighted in blue indicates the scene cur- rently selected for operations. You can use the Calibration function to correct these discrepancies.
For details on the popup window p. If you hold down the key of your computer keyboard and double-clickthis, the Selected Channel window will open as an additional view. B Mute indicator This indicator shows the mute groups to which the channel is assigned. Specifies whether channel selection will be linked with operations of the navigation keys. If you press this button, a conrmation dialog box will appear.
You can use control numbers 131, 3395, and 102119. The Cue signal of the corresponding channel will be sent to the monitor signal output destination. The Delay function is disabled if the Cue signal is being output. Before Clip +24 dB default +4 dBu 1. If the two passwords that were entered match, the Administrator password will be set. A keyboard window will appear, allowing you to enter a password. B Time This indicates the current time.
Please check with your Yamaha dealer. Nominal input level is -62 dBu to +10 dBu. All faders on the panel are motorized moving faders, so that when you recall a scene, the previous fader locations are reproduced immediately. For some parameters, you can adjust the value in ner steps greater detail by turning the encoder while pressing it. Other Functions Resetting to the default value Ctrl+click Move the cursor to a control or a parameter value, then hold down the key and click the mouse button to reset the value to the default e.
A User can use only the range of functionality permitted by the Administrator. If valid parameter change messages are transmitted from an external device, the parameters assigned to those parameter changes will be controlled. For details on the popup window p. The scene s you selected in step 2 will be cut, and the scenes of subsequent numbers will be moved forward. Hvit kytetty paristo valmistajan ohjeiden mukaisesti.
The stereo bus setting can be made in Mix Bus Setup of the Mixer Setup screen. Channels or parameters that are excluded from Recall operations by either Focus or Recall Safe will not be recalled. For details, refer to p. If you select a region of characters youve entered in the box and then enter a new character, the newly entered character will overwrite the selected region. TabsSome screens shown in the display consist of multiple pages. Ctrl+Shift+Click Move the mouse cursor to a channel fader or to a send knob or bar graph, and click while holding down the key and key to set the nominal value regardless of the default value. The date and time you specify here will affect the time stamp used when saving a scene.
When you press a knob in this eld, youll be able to use the multifunction encoders to control the corresponding horizontal row of knobs. Do not use the device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. This eld includes the following items. In this popup window you can select the channel to which Fade will be applied, and adjust the fade time. Sets all parameters in the window.
The input signal will start being compressed when the key-insignal exceeds this level; compression will be removed when the signal falls below this level. You cannot select multiple scenes as the copy-source. For details, refer to the section Scene memory editing that follows. In this case, the same content will be pasted to all selected scenes. You can set this to the default value +10 dB by holding down the key and clicking the knob. You can press this eld to cancel the selected channel.
If this button is off, press the button in the screen to turn it on. This assignment procedure will define the user-defined keys for the user who is currently logged-in, but if you are logged-in as the Administrator, you can also make user-defined key settings for the Guest account. You can press this eld to cancel the channel that is shown. If two or more output ports are patched, only will be shown as a representative. B Fader This is a realtime indication of the top panel fader position for the corresponding channel. You can select multiple scene numbers as the store-destination. E Fader Adjusts the input level of the channel.